Power Generator YDE13TA-TA3 - 8,5/10,5kW, single&triple phase, diesel, soundproof - Stager
Producer:
 |
Product code:
1158000013TATA3
Originaal ja asenduskoodid:
1158000013TATA3
Weight:
320 kg
Power output:
8,5/10,5 kW
Availability:
Ask for availability before ordering (Delivery 1-3 workday)
Description:
A soundproof diesel generator that covers a wide range of applications.
It is the first generator in the Stager range that comes with an alternator capable of producing the same three-phase and single-phase power and current.
Benefits:
If we have a three-phase generator and we want to use a single-phase consumer, we will only benefit from a quarter of the power.
YDE13TA-TA3 depending on the consumers can be switched from three-phase to single-phase and vice versa benefiting from all the power of the generator.
The advantage of being able to be used for all categories of consumers (two-phase and single-phase) up to 9 kW maximum power.
Another advantage is the fact that it is soundproof and the noise level is reduced.
It can also be used both for domestic and industrial use for power failures, with the possibility of mounting an ATS.
The generator is provided with the latest generation control panel.
An important help for construction sites where we know that there are both three-phase and single-phase consumers.
Technical data:
GENERATOR
Nominal frequency: 50 Hz
Number of phases: single-phase / three-phase
Power factor (cos Φ): 1.0 / 0.8 (lag)
Nominal voltage: 230 V / 400/230 V
Nominal power: 8.5 kVA (8.5 kW) / 10.5 kVA (8.5 kW)
Maximum power: 9.0 kVA (9kW) / 11.0 kVA (9 kW)
Nominal current: 36.9 A / 15.2 A
Fuel tank capacity: 25 L
Fuel consumption (100% load): 330 g/kW.h (3.5 L/h)
Fuel consumption (75% load): 297 g/kW.h (2.4 L/h)
Structure: ultra silent
Net weight: 320 kg
Dimensions (LxWxH): 1200 x 650 x 800 mm
Control panel: SmartGen HGM 4020
Control panel: SmartGen HGM 4020
Guaranteed noise level (LwA): 94 dB(A)
MOTOR
MOTOR
Engine model: YD2V80
Engine type: Diesel engine, 2 cylinders in V, 4-stroke, liquid cooling
Nominal power: 12 kW
Max. power: 12.5 kW
Nominal speed: 3000 rpm
Bore x stroke: 80 x 79 mm
Cylinder capacity: 0.749 L
Compression ratio: 23:1
Aspiration: NaturalOil bath capacity: 2.27 L
Oil type: SAE 10W-30 (PRO 10W-30)
Fuel type: Diesel 0# (summer) -10# (winter) -35# (frost)
Regulator type: Mechanical
Starting system: Electric 12V
Battery capacity: 36 Ah
ALTERNATOR
ALTERNATOR
Alternator model: KTDS-10
Alternator type: 2-pole AC alternator, synchronous, maximum power
Nominal power: 10 kW
Nominal speed: 3000 rpm
Nominal voltage: 230/400 V
Efficiency: 84%
Insulation class: F
Degree of protection: IP21
CONTROL PANEL
The SmartGen HGM4020 panel is used for the automatic control and monitoring of the current generator. It can perform functions such as: automatic start/stop, data measurement, protection alarms, etc.
All parameters can be configured from the front panel or using the USB interface (or RS485) and a computer. It can be widely used in all kinds of automatic control systems due to its compact structure, simple connections and high reliability.
Control panel features:
LCD display that allows easy viewing of information, resolution 132 x 64 pixels;
The RS485 communication port allows 3 "remote" functions through the MODBUS protocol;
Control and protection function: automatic start/stop of the generator, load transfer (ATS control) and error display and protection;
Parameter setting: allows the user to modify the settings and store them on a memory card. The parameters will not be lost even when it is turned off. The parameters can be set not only from the front panel, but also adjusted through the USB interface (or RS485 interface) using a PC;
The multiple temperature, pressure and fuel level sensors can be used directly, the parameters can be defined by the user;
Measurement and display of the following engine parameters: temperature, oil pressure, fuel level, rpm, battery voltage, rectifier voltage, number of operating hours, number of starts;
It can measure and display the voltage, current, frequency, power parameters of the network / generator.
Technical data control panel:
Supply voltage: 8 ~ 35 Vdc
Power consumption: < 3W (Standby mode: ≤ 2W)
Operating temperature: (-25 ~ +70)ºC
Alternator frequency: 50 / 60 Hz
AC system: 1P2W / 2P3W / 3P3W / 3P4W
Alternator voltage input range
- 3P4W (3-phase 4 wires): 15Vac – 360Vac (ph-N)
- 3P3W (three-phase 3 wires): 30Vac – 620Vac (ph-ph)
- 1P2W (single-phase 2 wires): 15Vac – 360Vac (ph-N)
- 2P3W (biphase 3 wires): 15Vac – 360Vac (ph-N)
RPM sensor voltage: 1.0 V – 24.0 V (RMS)
Speed sensor frequency: 10000 Hz (max.)
Start output relay: 5A 28Vdc at source output
Fuel output relay: 5A 28Vcc at the source output
Programmable output relays: 4 (1A 28Vdc at source output)
Degree of protection: IP65
AMF: YES
Detection & Display kW/A: YES
Programmable interface: USB / RS485
CANBUS port: YES
Maintenance: YES
Record log: YES
Emergency start function: YES
Technical Data
Fuel type:
Diesel
Fuel tank volume:
25 l
Starter:
Electrical start
Fuel consumption:
100% koormus: 330 g/kW.h (3,5 L/h)
75% koormus: 297 g/kW.h (2,4 L/h)
Power output:
8,5/10,5 kW
Sound power level, guaranteed (LwA):
94 dB(A)
Voltage:
230 / 400/230, ümberlülitusega V
Maximum power:
9/11 kW
Frequency:
50 Hz
Rated current:
36,9/15,2 A
Dimensions
Weight:
320 kg
Product dimensions (L x W x H):
1200x650x800 mm
Engine
Engine type:
Diesel engine, 4-stroke, 2 cylinders in V, liquid cooling
Oil bath capacity:
2,27 l