Power Generator YDE12E3 - 10kW, triple phase, diesel, key start - Stager
Producer:
 |
Product code:
1158000012E3
Originaal ja asenduskoodid:
1158000012E3
Weight:
240 kg
Power output:
9 kW
Availability:
In stock (Delivery 1-3 workday)
Anti-vibration pads;
Dry air filter, fuel filter, oil filter;
Emergency stop button mounted on the control panel;
Electrical current terminal protection covers (to restrict access or accidental touching)
SmartGen HGM 4020 control panel;
12V starting battery, support and cables;
Lifting ring in the upper part of the generator;
Digital Display;
Equipped with wheels for transport;
Optional: ATS.
Autonomy: 12 hours
CONTROL PANEL
The SmartGen HGM4020 panel is used for the automatic control and monitoring of the current generator. It can perform functions such as: automatic start/stop, data measurement, protection alarms, etc.
All parameters can be configured from the front panel or using the USB interface (or RS485) and a computer. It can be widely used in all kinds of automatic control systems due to its compact structure, simple connections and high reliability.
Control panel features:
LCD display that allows easy viewing of information, resolution 132 x 64 pixels;
The RS485 communication port allows 3 "remote" functions through the MODBUS protocol;
Control and protection function: automatic start/stop of the generator, load transfer (ATS control) and error display and protection;
Parameter setting: allows the user to modify the settings and store them on a memory card. The parameters will not be lost even when it is turned off. The parameters can be set not only from the front panel, but also adjusted through the USB interface (or RS485 interface) using a PC;
The multiple temperature, pressure and fuel level sensors can be used directly, the parameters can be defined by the user;
Measurement and display of the following engine parameters: temperature, oil pressure, fuel level, rpm, battery voltage, rectifier voltage, number of operating hours, number of starts;
It can measure and display the voltage, current, frequency, power parameters of the network / generator.
Technical data control panel :
Supply voltage: 8 ~ 35 Vdc
Power consumption: < 3W (Standby mode: ≤ 2W)
Operating temperature: (-25 ~ +70)ºC
Alternator frequency: 50 / 60 Hz
AC system: 1P2W / 2P3W / 3P3W / 3P4W
Alternator voltage input range
- 3P4W (3-phase 4 wires): 15Vac – 360Vac (ph-N)
- 3P3W (three-phase 3 wires): 30Vac – 620Vac (ph-ph)
- 1P2W (single-phase 2 wires): 15Vac – 360Vac (ph-N)
- 2P3W (biphase 3 wires): 15Vac – 360Vac (ph-N)
RPM sensor voltage: 1.0 V – 24.0 V (RMS)
Speed sensor frequency: 10000 Hz (max.)
Start output relay: 5A 28Vdc at source output
Fuel output relay: 5A 28Vcc at the source output
Programmable output relays: 4 (1A 28Vdc at source output)
Degree of protection: IP65
AMF: YES
Detection & Display kW/A: YES
Programmable interface: USB / RS485
CANBUS port: YES
Maintenance: YES
Record log: YES
Emergency start function: YES
Technical Data
Fuel type:
Diesel
Fuel tank volume:
25 l
Starter:
Electrical start
Fuel consumption:
~340 g/kW*h (~3,6 l/h)
Power output:
9 kW
Sound power level, guaranteed (LwA):
97 dB(A)
Voltage:
230 / 400 V
Maximum power:
10 kW
Frequency:
50 Hz
Rated current:
15.8 A
Dimensions
Weight:
240 kg
Product dimensions (L x W x H):
1035x605x660 mm
Engine
Engine type:
Diesel engine, 4-stroke, 2 cylinders in V, water cooling
Oil bath capacity:
3 l
Seotud tooted:
| Name | Price | Quantity | ||
|---|---|---|---|---|
 |
4T Oil 5W30 0,95 L | 10.50 € | Add to cart | |
 |
4T Full Synthetic oil SAE30/10W30 0,95L Toro | 13.80 € | Add to cart |