0
0
Menüü

Power Generator YDE8600TA-TA3 - 6kW, 400V/230V switching, diesel, soundproof - Stager

Producer:
Product code:
1158000002
Originaal ja asenduskoodid:
1158000002
Weight:
180 kg
Power output:
5,5 kW
Availability:
Ask for availability before ordering (Delivery 1-3 workday)
Description:
A soundproof diesel generator that covers a wide range of applications.
 
 
Advantages:
If we have a three-phase generator and we want to use a single-phase consumer, we will only benefit from a quarter of the power.
YDE8600TA-TA3 depending on the consumers can be switched from three-phase to single-phase and vice versa benefiting from all the power of the generator.
The advantage of being able to be used for all categories of consumers (two-phase and single-phase) up to 6 kW maximum power.
Another advantage is the fact that it is soundproof and the noise level is reduced.
It can also be used both for domestic and industrial use for power failures, with the possibility of mounting an ATS.
The generator is provided with the latest generation control panel.
An important help for construction sites where we know that there are both three-phase and single-phase consumers.
It is equipped with wheels for transport.
Optional:
ATS
GSM connection module CMM366A-4G

 

Technical data:
GENERATOR

Nominal frequency: 50 Hz
Number of phases: single-phase / three-phase
Power factor (cos Φ): 1.0 / 0.8 (lag)
Nominal voltage: 230 V / 400/230 V
Nominal power: 5.5 kVA (5.5 kW) / 6.9 kVA (5.5 kW)
Maximum power: 6.0 kVA (6 kW) / 7.5 kVA (6 kW)
Nominal current: 23.9 A / 9.9 A
Nominal speed: 3000 rpm
Autonomy @100% load: 6.5 hours
DC output: 12V / 8.3A
Structure: silent
Degree of protection: IP23
Control panel: Smartgen HGM4020N-S14
Excitation type: AVR (Self-excitation at constant voltage)
Coupling method: Rigid coupling transmission
Net / gross weight: 170 / 180 kg
Dimensions (LxWxH): 955 x 525 x 680 mm
 
Noise level @7m: 74 dB

ENGINE:
Engine model: YD192FG
Engine type: Diesel, 1 cylinder, 4-stroke, air cooling, direct injection
Nominal power: 7.5 kW / 3000 rpm
Bore x Stroke: 92 x 75 mm
Cylinder capacity: 0.498 L
Compression ratio: 19:1
Oil bath capacity: 1.7 L
Oil type: SAE 10W-30 (PRO 10W-30), SAE 15W-40
Oil sensor: YES
Fuel type: Diesel
Fuel tank capacity: 14.5 L
Fuel consumption (100% load): 2.23 L/h
Fuel consumption (75% load): 1.75 L/h
Fuel consumption (50% load): 1.23 L/h
Aspiration: Natural
System mode: 12V electric start
Electric motor capacity: 12V, 1.2 kW
Starting voltage: 12V
Battery capacity: 36 Ah

ALTERNATOR:
Alternator model: GTQ204C-140
Alternator type: 2-pole AC alternator, collector brushes, synchronous
Nominal power: 6.0 kVA (6 kW)
Nominal speed: 3000 rpm
Nominal voltage: 230/400V
Efficiency: 82%
Insulation class: F
Degree of protection: IP23
 
CONTROL PANEL
The SmartGen HGM4020 panel is used for the automatic control and monitoring of the current generator. It can perform functions such as: automatic start/stop, data measurement, protection alarms, etc.
All parameters can be configured from the front panel or using the USB interface (or RS485) and a computer. It can be widely used in all kinds of automatic control systems due to its compact structure, simple connections and high reliability.
 
Control panel features:
LCD display that allows easy viewing of information, resolution 132 x 64 pixels;
The RS485 communication port allows 3 "remote" functions through the MODBUS protocol;
Control and protection function: automatic start/stop of the generator, load transfer (ATS control) and error display and protection;
Parameter setting: allows the user to modify the settings and store them on a memory card. The parameters will not be lost even when it is turned off. The parameters can be set not only from the front panel, but also adjusted through the USB interface (or RS485 interface) using a PC;
The multiple temperature, pressure and fuel level sensors can be used directly, the parameters can be defined by the user;
Measurement and display of the following engine parameters: temperature, oil pressure, fuel level, rpm, battery voltage, rectifier voltage, number of operating hours, number of starts;
It can measure and display the voltage, current, frequency, power parameters of the network / generator.
 
Technical data control panel:
Supply voltage: 8 ~ 35 Vdc
Power consumption: < 3W (Standby mode: ≤ 2W)
Operating temperature: (-25 ~ +70)ºC
Alternator frequency: 50 / 60 Hz
AC system: 1P2W / 2P3W / 3P3W / 3P4W
Alternator voltage input range
- 3P4W (3-phase 4 wires): 15Vac – 360Vac (ph-N)
- 3P3W (three-phase 3 wires): 30Vac – 620Vac (ph-ph)
- 1P2W (single-phase 2 wires): 15Vac – 360Vac (ph-N)
- 2P3W (biphase 3 wires): 15Vac – 360Vac (ph-N)
RPM sensor voltage: 1.0 V – 24.0 V (RMS)
Speed ​​sensor frequency: 10000 Hz (max.)
Start output relay: 5A 28Vdc at source output
Fuel output relay: 5A 28Vdc at source output
Programmable output relays: 4 (1A 28Vdc at source output)
Degree of protection: IP65
AMF: YES
Detection & Display kW/A: YES
Programmable interface: USB / RS485
CANBUS port: YES
Maintenance: YES
Record log: YES
Emergency start function: YES
Price:
1950.00 €

Technical Data

Fuel type:
Diesel
Fuel tank volume:
14,5 l
Starter:
Electrical start
Fuel consumption:
(100%): 2,23 L/h (75%): 1,75 L/h (50%): 1,23 L/h
Power output:
5,5 kW
Sound power level, guaranteed (LwA):
@7m: 74 dB dB(A)
Voltage:
230 / 400/230, ümberlülitusega V
Maximum power:
6 kW
Frequency:
50 Hz
Rated current:
23,9 / 9,9 A

Dimensions

Weight:
180 kg
Product dimensions (L x W x H):
955 x 525 x 680 mm

Engine

Engine type:
Diesel engine, 4-stroke, 1 cylinder, air cooling
Oil bath capacity:
1,7 l

Seotud tooted:

  Name Price Quantity  
Power reserve switching automation box for generators (ATS) - Stager YDE series for 3-phase sharing 550.00 € Add to cart
Loncin 4T 10W-30 oil 2L 20.50 € Add to cart